MotoTec - Parts
Replacement pull starter for the 49cc chinese engine. This pull start will also work on most 33cc, 36cc, 43cc, 49c and 52cc chinese engines with this style pull start. Diagonal Bolt Hole Spacing: 95mm
MotoTec - Parts
Replacement Headlight for the Knockout, includes Keys.
MotoTec - Parts
Full rear wheel for Trike 350w/500w. Includes Rim, Tire, Tube & Bearings. Tire size is 280-2.50-4
MotoTec - Parts
This is version C controller, labled on the sticker.
MotoTec - Parts
Used to adjust the fuel mixture screw on new carburetors, the screw is shaped like a cicle with a dot inside.
MotoTec - Parts
Size 90-65-6.5 Inner tube found on a wide range of vehicles. Stand-up Gas and Electric Scooters, Gas and Electric Pocket Bikes, Mini-choppers, Lawn and Garden equipment and much more. 90-65-6.5 inner tube Bent angle valve stem
MotoTec - Parts
Front and Rear Fender for the Fatboy 48v 500w Electric Scooter
MotoTec - Parts
Clutch Shoes for 2010 and later Evo Rx and 2x models. These also fit all 33cc, 36cc, 43cc, 49cc and 52cc 2-stroke engines commonly found on stand-up gas scooters, pocket bikes, mini-choppers etc. Virtually all 33-52cc, 2-stroke Chinese engines use this clutch shoe. Overall Diameter: 76mm Bolt Hole Spacing: 54mm Thickness: 13.7mm
MotoTec - Parts
Headlight Clamp for Knockout. Sold as one single clamp, not as a set
MotoTec - Parts
MotoTec 2000w Scooter 11inch Inner Tube (110/50-6.5) (90/65-6.5)
Size 110/50-6.5 Inner tube found on a wide range of vehicles. Stand-up Gas and Electric Scooters, Gas and Electric Pocket Bikes, Mini-choppers, Lawn and Garden equipment and much more. This tube is interchangeable with 90/65-6.5, both sizes are printed on the tube. 110/50-6.5 inner tube Bent angle valve stem
MotoTec - Parts
Front Fender for the MotoTec Knockout 1000w Electric Scooter
MotoTec - Parts
Replacement controller for the MotoTec 36v Lithium Dirt Bike
MotoTec - Parts
Exhaust Deflector for 33cc to 49cc 2-stroke engines. Hole opening 1/2 inch.
MotoTec - Parts
Output: 48v (1600mA)
MotoTec - Parts
4-Wire Ignition Switch for the 24v or 36v dirt bike models.
MotoTec - Parts
Model: MY8922 Voltage: 36v Wattage: 800w Rated Current: 28.5A Replacement motor for the MotoTec 1600w Skateboard (uses two 800w motors)
MotoTec - Parts
36v 10ah Replacement Lithium Battery Pack for the MotoTec Pro Dirt Bike. Please Note: This battery cannot be expedited (shipped by air delivery) or with the post office, you can only choose the Fedex Ground shipping option.
MotoTec - Parts
Replacement 11 Tooth Sprocket, Nut, Spacer & Washer
MotoTec - Parts
Used to adjust the fuel mixture screw on new carburetors, the screw is shaped like the Pac Man figure.
MotoTec - Parts
MotoTec Twist Throttle Assembly for Electric Pocket Bikes
MotoTec - Parts
11 inch knobby dirt tire for MotoTec 2000w Scooter and 2010 and later Evo 2x Big and Evo Rx / 50x Size: 90/65-6.5
All Batteries
Battery pack is for MotoTec 36v Electric Dirt Bike 500w Lithium Blue Original replacement battery for the MotoTec 36v Lithium Dirt Bike. Includes black case as pictured with 36v 8ah Li-Ion battery with wires, connectors and charging port. PC Connector.
MotoTec - Parts
This Performance Exhaust only fits on the 33cc 2-stroke pocket bike, these two part numbers. MT-GP_Black MT-GP_Blue IMPORTANT: The newest pocket bikes use a taller gas tank that will touch this pipe and it will melt the gas tank. You will need to install thick adhesive heat shield material to the bottom of the gas [...]
MotoTec - Parts
5M-350-14.5 Used on the MotoTec 600w Skateboard
MotoTec - Parts
2-Prong Female Connector End